Asphalt can increase the value of your home by $318
Asphalt in Ashland is commonly used in pavements and driveways. It has become a modern paving solution in many homes due to many reasons. Asphalt in Ashland can create a smooth surface for safe driving. Smooth roads can have a substantial contact with car tires that can result in a safer and more reliable drive. Also, Ashland asphalt is deemed to be cost-effective. The smoothness of asphalt can reduce wear and tear on car tires which can significantly lower the operating cost of the vehicle. Installing asphalt is quick and easy, thus, saving time, money, and labor cost. It is also energy-efficient. It can lessen the rolling resistance between tires and pavement which means better fuel economy and less carbon dioxide emission. When asphalt pavement in Ashland is damaged, it can be replaced easily. The damaged asphalt pavement will not be disposed of, but it will be recycled to be used again. It has been reported that asphalt is the most recycled material in the country with nearly 100 million tons of asphalt pavement being reused and recycled annually. This makes asphalt in Ashland environment-friendly.
Fair price breakdown
Asphalt is mostly used to pave driveways in many homes. It is affordable and can only cost around $3 to $4 per square foot. Choosing asphalt as a pavement solution is not only economical and practical, but its durability can withstand harsh weather conditions too. Asphalt in Ashland is mostly used by many homeowners living in cold regions, as compared to concrete, because of its ability to adapt to temperature changes. Concrete, on the other hand, has the tendency to crack when exposed to a temperature below freezing point. This could be very costly to repair for homeowners.
Estimated final cost for asphalt
|Driveway Cost||215 Square Feet||$171.81|
|Driveway Labor||2.2 Hours||$116.91|
|Driveway Job Materials and Supplies||200 Square Feet||$21.56|
|Driveway Equipment Allowance||$82.83|
|Totals - Cost to Install Asphaltic Concrete Driveways - 215 Square Feet||$393.10|
|Average Cost Per Square Foot||$1.96|
Find the Best Costs on Asphalt - Ashland, 41101
Several factors can affect the asphalt installation in your pavement. One of this is the local material cost that is usually determined by the freight and current market price in your area. Ashland asphalt, when used as pavement, will need to have good drainage which can also add to the cost of the installation. The base coat will also have an impact on the expense. Coats are usually around $1 to $2.50 per square foot. Special top coats and sealants used in asphalt in Ashland can cost you an additional $1 to $2.5 per square foot for basic top coats and around $3 to $5 for special top coats. Installation of foundation can also add to the overall price of your asphalt project. Installing 8 to 10 inches of gravel below the asphalt can cost around $1 to $2.50 per square foot of the surface area.
Boyd County Asphalt FAQ
Last Updated: Jun 9, 2022
Local pros & Availability
Concrete Contractors available in your area
11016 State Route 716.Ashland, KY 41102
23213 Newman St.Ashland, KY 41101
32220 State Rr 3 Cannonsburg.Ashland, KY 41101
43213 Newman St.Ashland, KY 41101
59322 Naples Rd.Ashland, KY 41102
61311 Beech St.Kenova, WV 25530